It can be used to bond tape to various automobile parts, such as car door sound insulation sealing strips, car handles, car door bowls, car decoration strips, anti-collision rubber strips, car rearview mirrors, rain eyebrow rain shielding, car film edge banding, rear tank fuel cap, car lights (such as back EPDM buffer strip bonding, car light frame EPDM rubber strip bonding), etc.It can be used in all kinds of windows, doors, elevators, air conditioners, furniture soundproof seals, welcome pedals, rain and rain gears.It can be combined with aluminum foil tape, copper foil tape, PET tape film, advertising film, etc. with electroplated metal, epoxy board, PP, EPDM and other materials for laminate bonding.

Usage Introduction

1：Before use, the dust and oil on the surface of the substrate should be removed.

2：Due to the presence of oil stains, release agents, etc. on the surface of many substrates, it is recommended to clean with P-FAREL 1# cleaning solvent, after which it is strongly recommended to apply the primer with a pressure of more than 2kg/m through BASF Beige Nano Scrape to ensure the best bonding effect.

3：Shake the container with the primer vigorously to ensure that the substances are evenly mixed. Use a special tool or brush to evenly apply the primer to the bonding surface, and the thickness of the dry coating film is 2-4μm.

4：In a ventilated environment, it can usually be dried at room temperature for 2-5 minutes, and in a closed environment, it can be dried at room temperature for 5-10 minutes.

5：Normally, after priming is applied, the tape needs to be bonded within 8 hours, and the primer treatment needs to be re-applied after 8 hours.

6：Normally, after priming is applied, the tape needs to be bonded within 8 hours, and the primer treatment needs to be re-applied after 8 hours.

7：For oil-filled EPDMs, the tape should be bonded within 30 minutes after the primer coat has dried, otherwise the oiliness will spread over the primer surface and cause poor adhesion.

8：After the tape is bonded, after 0.5 hours of rest, the preliminary adhesive performance can be evaluated, and after 24 hours of optimal resting.

Warn

1：The product should be stored away from light and sealed in time after opening.

2：flammable items, keep away from heat sources and open flames,

3：Wear protective equipment when using it and avoid contact with eyes and skin.

4：Please install ventilation devices next to the machines using this product and in the workshop to ensure the health

of users and the environment.

5：After use, please seal it in time to prevent pollution of the environment or moisture mixing into the product that

affects the quality of the product.

6：In case of accidental contact with eyes, rinse immediately with plenty of water. If you still feel unwell, you should

seek medical attention immediately. If accidentally swallowed or overinhaled, seek medical attention immediately

7：Store in a dark place at a temperature of 0-30°C; Shelf life 2 years.