Release Date: 2024-07-08
How To Remove Double-Sided Tape From The Wall

How to remove double-sided tape from the wall

1. Use a hair dryer to remove the method: use a hair dryer to blow the adhesive to soften it, and when the adhesion of the double-sided tape becomes weaker, it can be removed more casually

2. Use aged vinegar removal method: You can take a dry cloth covered with vinegar to cover the center of the entire double-sided tape trace, and after the sticky stain of the double-sided tape is completely wet, it can be easily removed with a ruler.

3. Alcohol removal method: use a soft cloth or something like that to dip a sufficient amount of 95% alcohol solution, and then gently wipe it on the self-adhesive, the self-adhesive will easily become soft and fall off, the advantage of using alcohol solution to remove is that it does not cause any damage to the surface of plastic products or the surface of the car paint, but the disadvantage is that alcohol is not very effective for the removal of all self-adhesives.

4. Hand cream removal method: it can also achieve the effect of removing self-adhesive, hand cream contains a large amount of solvent (generally more than 70%), and the water contains a certain amount of surfactant, and the surfactant has good wetting, penetration and dissolution ability, which can quickly penetrate between the self-adhesive and the surface of the object, so as to achieve the purpose of removal. Of course, some similar products, such as creams, facial cleansers, cleansers, etc., also have the same effect.

5. Gasoline removal method: use a soft cloth and other materials to dip a little gasoline and gently rub it on the self-adhesive, at this time, it should be noted that because gasoline has a "dissolving" effect on a certain plastic or paint, it must be careful when using it to avoid unnecessary trouble. Before using it, you can first rub the dot in an unimportant place to observe the changes, and use it if there is no problem; However, it must be noted that the amount of gasoline should not be too much, and the wiping time should be as short as possible, otherwise it will cause some damage to the plastic surface or car film surface.

The best way to remove double-sided tape from others Serface.

1. Use soap and a little ammonia and turpentine to mix liquid, which can remove a lot of dirt and make the glass surface more shiny (this article is applicable to ceramic tiles, ceramics, glass, refrigerators, etc.).

2. Repeatedly stick and tear with transparent adhesive with good viscosity to remove some traces on the surface of the double-sided tape

3. Wipe it off with a little sodium water, or use paint thinner.

4. You can use a hair dryer to dry, and then you can scrape it gently

5. Wipe with a cotton swab dipped in nail polish remover.

6. Wipe the wind oil essence.

7. Use a special detergent or sneaker detergent to wipe it.

8. Use the 4B eraser for drawing to be very soft, and you can erase it with the Korean eraser.

9. If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before trying

10. Use "STP Universal Foam Cleaner", spray and sassafras, white as new, you will definitely be satisfied! (This thing is sold in auto supply stores, a bottle of about 80 yuan) double-sided tape in the middle of the glue is composed of chemicals, with blowing is to soften it, wind oil essence is to decompose it, the two are best to use together.


Tips: a good double-sided tape is not left behind. You can also use a toothbrush dipped in toothpaste, the toothbrush should not be too hard, it will hurt the wood. The last remaining shallow mark can be erased with an eraser!

Send Inquiry